You have no items in your shopping cart.
Close
Menu
Menu
Search
0
0
Filters

BCM Recce-14 MK2 BFH ELW MCMR FDE

Be the first to review this product
All outgoing orders are subject to shipping cost as well as $40 shipping insurance to protect your package additional to the cost of the product. Email FFL@toppackdefense.com or call (608) 318-5238 for purchase and for FFL transfer shipping location.
Manufacturer: Bravo Company USA
Availability: In stock
$2,199.00
- +

About the BCM® MK2 BFH 14.5" Mid Length ELW Complete Upper Receiver w/ MCMR-13 Handguard

All BCM® Rifles ship with:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount

Manufactured by Bravo Company MFG, Inc. (BCM)

These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.

Featuring BCM’s Patented MK2 Upper Receiver

This proprietary design offers enhanced rigidity over the USGI product.  The increased rigidity limits barrel deflection which aids in consistency/accuracy.   Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment.   A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. U.S. Patent Numbers: 10670355, 10677549, D888182

Cold Hammer Forged Barrels

This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)

M4 Feed Ramp Barrel Extension and Upper Receiver

In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps.
 
This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.

T-Marked Upper Receiver

The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.

USGI 1/7 Twist Rate

The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.

Mil-Spec Barrel Steel (Certified Mil-B-11595E)

BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.

Chrome Bore and Chamber

One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.

Manganese Phosphate Barrel Finish

Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.

5.56 NATO Chambers

The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammunition. 

HPT / MP Inspected Barrels

Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
HUXWRX Flashhider Pin and Welded 
FDE Mod 2 Stock
FDE Mod 4 Pistol Grip
BCM4 Lower Receiver
PNT Trigger
Ambi MK2 Charging Handle - Large Latch
RMS M1T0 System for 
  • Lessens felt recoil, without compromising reliability
  • Provides a more consistent carrier velocity, which can aid in accuracy, reliability over conventional carbine buffer system
  • Increased internal counterweight travel reduces bolt bounce
  • Internal spring to reduce noise of counter weight shifting and ensure more consistent weight placement
  • Mil-Spec M16A4 rifle spring with more spring coils than M4 carbine, increases consistency and widens operating envelope
  • Buffer made of 7075T6 aluminum, hard coat anodized for lasting endurance. Comprised of Mil-Spec components
  • BCM US Patent #10415907

(PLEASE NOTE:  because of the MK2’s longer length some Mil-Spec stocks may not completely collapse closed all the way up to the M4 Lock nut.)

We are committed to conducting our operations in full compliance with all applicable federal, state, and local laws and regulations. We continuously review and update our policies and procedures to ensure adherence to current legal requirements. Any products or content provided through this platform are intended to comply with relevant legal standards, and we reserve the right to make changes as necessary to maintain such compliance.

All activities, transactions, and content associated with this platform are intended to fully comply with all applicable federal, state, and local firearm laws and regulations. It is the responsibility of each individual to ensure that they are in compliance with the laws and regulations governing firearms in their jurisdiction, including but not limited to laws regarding ownership, possession, transfer, capacity, transportation, and use of firearms.

We do not condone or facilitate any unlawful activity. All firearms-related transactions must be conducted in accordance with the law, including applicable background checks, age and eligibility requirements, and any necessary licensing. By using this platform, you agree to abide by all relevant laws and acknowledge that it is your responsibility to stay informed about the legal requirements in your area. 

By making a purchase you agree to comply with all applicable federal, state, and local laws and regulations, including U.S. export regulations, and represent and warrant that you are of legal age to purchase and not prohibited by law from purchasing or possessing firearms or the products sold on this website. You further agree not to export, sell, transfer, or otherwise dispose of any product purchased from this website in any other country without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Top Pack Defense reserves the right to cancel any sale at any point to maintain complete compliance. All FFLs receiving transfers will be contacted prior to shipping to obtain permission as well as to verify compliance with local regulations.

About the BCM® MK2 BFH 14.5" Mid Length ELW Complete Upper Receiver w/ MCMR-13 Handguard

All BCM® Rifles ship with:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount

Manufactured by Bravo Company MFG, Inc. (BCM)

These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.

Featuring BCM’s Patented MK2 Upper Receiver

This proprietary design offers enhanced rigidity over the USGI product.  The increased rigidity limits barrel deflection which aids in consistency/accuracy.   Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment.   A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. U.S. Patent Numbers: 10670355, 10677549, D888182

Cold Hammer Forged Barrels

This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)

M4 Feed Ramp Barrel Extension and Upper Receiver

In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps.
 
This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.

T-Marked Upper Receiver

The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.

USGI 1/7 Twist Rate

The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.

Mil-Spec Barrel Steel (Certified Mil-B-11595E)

BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.

Chrome Bore and Chamber

One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.

Manganese Phosphate Barrel Finish

Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.

5.56 NATO Chambers

The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammunition. 

HPT / MP Inspected Barrels

Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
HUXWRX Flashhider Pin and Welded 
FDE Mod 2 Stock
FDE Mod 4 Pistol Grip
BCM4 Lower Receiver
PNT Trigger
Ambi MK2 Charging Handle - Large Latch
RMS M1T0 System for 
  • Lessens felt recoil, without compromising reliability
  • Provides a more consistent carrier velocity, which can aid in accuracy, reliability over conventional carbine buffer system
  • Increased internal counterweight travel reduces bolt bounce
  • Internal spring to reduce noise of counter weight shifting and ensure more consistent weight placement
  • Mil-Spec M16A4 rifle spring with more spring coils than M4 carbine, increases consistency and widens operating envelope
  • Buffer made of 7075T6 aluminum, hard coat anodized for lasting endurance. Comprised of Mil-Spec components
  • BCM US Patent #10415907

(PLEASE NOTE:  because of the MK2’s longer length some Mil-Spec stocks may not completely collapse closed all the way up to the M4 Lock nut.)

We are committed to conducting our operations in full compliance with all applicable federal, state, and local laws and regulations. We continuously review and update our policies and procedures to ensure adherence to current legal requirements. Any products or content provided through this platform are intended to comply with relevant legal standards, and we reserve the right to make changes as necessary to maintain such compliance.

All activities, transactions, and content associated with this platform are intended to fully comply with all applicable federal, state, and local firearm laws and regulations. It is the responsibility of each individual to ensure that they are in compliance with the laws and regulations governing firearms in their jurisdiction, including but not limited to laws regarding ownership, possession, transfer, capacity, transportation, and use of firearms.

We do not condone or facilitate any unlawful activity. All firearms-related transactions must be conducted in accordance with the law, including applicable background checks, age and eligibility requirements, and any necessary licensing. By using this platform, you agree to abide by all relevant laws and acknowledge that it is your responsibility to stay informed about the legal requirements in your area. 

By making a purchase you agree to comply with all applicable federal, state, and local laws and regulations, including U.S. export regulations, and represent and warrant that you are of legal age to purchase and not prohibited by law from purchasing or possessing firearms or the products sold on this website. You further agree not to export, sell, transfer, or otherwise dispose of any product purchased from this website in any other country without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Top Pack Defense reserves the right to cancel any sale at any point to maintain complete compliance. All FFLs receiving transfers will be contacted prior to shipping to obtain permission as well as to verify compliance with local regulations.

*
*
*
Customer service
My account

Copyright 2025 Top Pack Defense. All rights reserved. | Register | Log in